Amplitec 10W Digital Band Selective Outdoor Cellular Operator Signal Amplifier
Brand: Amplitec
Product origin: Made In China
-Sub-band frequency and bandwidth can be set by local monitoring panel,which is easier and more convenient.
-40dBm 85dB high power signal booster indoor coverage area upto 10000-15000㎡,outdoor upto 3-6km and easy to install.
-Digital ALC technology,auto limit the output power to ensure stable signal coverage.
-OLED screen can clearly display working frequency,gain,output power and easily check working status of the device.
-S40T signal repeater auto detect isolation after start-up, to avoid self-oscillation.
-Able to increase signal coverage,decrease mobile phone radiation, and increase mobile phone battery lifespan.
-Why Amplitec is the most professional signal booster manufacturer?
-Amplitec handle many engineering cases around the world,we have rich experience in mobile phone signal coverage project.
-Amplitec Own Chinese the largest signal booster manufacturing factory,so our quality control and production capacity leading the world.
-Most of Amplitec's signal booster have certificates,such as CE,RoHS,FCC,etc...
-Amplitec have rich exhibition experience,our signal boosters are recognized in many regions around the world.
-Amplitec LTE Repeater Mobile Cell Phone Antenna Network Signal Booster Support These Frequency Band
-Single Band
Models | Uplink | Downlink |
S40T-B8 | 880 ~ 915 MHz | 925 ~ 960 MHz |
S40T-B3 | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz |
S40T-B1 | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
S40T-B7 | 2500 ~ 2570 MHz | 2620 ~ 2690 MHz |
S40T-B20 | 791 ~ 821 MHz | 832 ~ 862 MHz |
-Dual Band
Models | Uplink | Downlink |
S40T-B3B8 | 880 ~ 915/1710 ~ 1785 MHz | 925 ~ 960/1805 ~ 1880MHz |
S40T-B1B8 | 880 ~ 915/1920 ~ 1980 MHz | 925 ~ 960/2110 ~ 2170MHz |
S40T-B1B3 | 1710 ~ 1785/1920 ~ 1980 MHz | 1805 ~ 1880/2110 ~ 2170MHz |
S40T-B3B20 | 830 ~ 862/1710~1785 MHz | 791 ~ 821/1805~1880 MHz |
S40T-B1B20 | 791 ~ 821/1920 ~ 1980 MHz | 832 ~ 862/2110 ~ 2170 MHz |
S40T-B7B8 | 880 ~ 915/2500 ~ 2570 MHz | 925 ~ 960/2620 ~ 2690MHz |
S40T-B7B20 | 791 ~ 821/2500 ~ 2570 MHz | 832 ~ 862/2620 ~ 2690MHz |
-Three Tri-Band
Models | Uplink | Downlink |
F40T-B1B3B8 | 890 ~ 915/1710 ~ 1785/1920 ~ 1980 MHz | 935 ~ 960/1805 ~ 1880 /2110 ~ 2170 MHz |
F40T-B1B3B20 | 832 ~ 862/1710 ~ 1785/1920 ~ 1980 MHz | 791 ~ 821/1805 ~ 1880 /2110 ~ 2170 MHz |
F40T-B1B3B7 | 1710 ~ 1785/1920 ~ 1980/2500 ~ 2570 MHz | 1805 ~ 1880 /2110 ~ 2170/2620 ~ 2690 MHz |
F40T-B1B7B8 | 890 ~ 915/1920 ~ 1980/2500~2570 MHz | 935 ~ 960/2110 ~ 2170/2620~2690 MHz |
F40T-B3B7B20 | 832 ~ 862/1710 ~ 1785/2500 ~ 2570 MHz | 791 ~ 821/1805 ~ 1880 /2620 ~ 2690 MHz |
F40T-B3B7B8 | 890 ~ 915/1710 ~ 1785/2500 ~ 2570 MHz | 935 ~ 960/1805 ~ 1880 /2620 ~ 2690 MHz |
-S40T 2g 3g 4g Mobile Cell Phone Cellular Signal Booster Technical Specification
Items | Uplink | Downlink | ||
Operating Bandwidth | 0.2~20 MHz(Frequency can be set , 200 kHz step) | |||
Sub-bands | 1~3 | |||
Output power | Type 25±2 dBm | Type 40±2 dBm | ||
Gain | Type 85±2 dB | Type 90±2 dB | ||
Ripple in Band | Type ≤4 dB | Type ≤4 dB | ||
VSWR | ≤2 | ≤2 | ||
Max. input power without damage | -10 dBm | -10 dBm | ||
Out of Band Gain | Fully comply with 3GPP | |||
EVM | Fully comply with 3GPP | |||
PCDE | Fully comply with 3GPP | |||
ACRR | Fully comply with 3GPP | |||
Spurious Emission | 9KHz~1GHz | ≤-36 dBm | ≤-36 dBm | |
1GHz~12.75GHz | ≤-30 dBm | ≤-30 dBm | ||
Gain Attentute Range | 1~31 dB,step of 1 dB | |||
ALC active 10dB, output power error | ∣△∣≤2 dB | ∣△∣≤2 dB | ||
Monitoring
| Local | OLED & USB | ||
Remote | NMS Cloud Connection | |||
Local Control Or Remote Control | 1.Repeater Info | |||
2.UL&DL Gain | ||||
3.PA ON/OFF | ||||
4.Over Output Power Alarm Level Limit | ||||
5.Temperature Alarm Level Limit | ||||
Local Monitoring Or Remote Monitoring | 1.Over Output Alarm | |||
2.Over Temperature Alarm | ||||
3.PA Failure Alarm | ||||
4.Power Supply Alarm | ||||
Noise Figure | ≤6 dB | ≤6 dB | ||
Time Delay | ≤13 μs | ≤13 μs | ||
Power Supply | AC：220V | |||
RF Connector | N-Female | |||
Environment Condition | IP65 | |||
Humidity | < 90% | |||
Operating Temperature | -10℃ ~ +55℃ | |||
-Why Choose The Best Brand Amplitec Signal Booster Manufacturer Of The World?
-Amplitec use Chinese the topest technology on mobile cell phone signal booster repeater to increase cellphone signal received,boost signal strength.
-High power design so that easy to cover indoor coverage area upto 10000-15000㎡,outdoor upto 3-6km.
-Each one motherboard use the topest technology so that Amplitec signal boosters have ALC,MGC and Auto turn-off function.
Auto turn-off in case of excessive self oscillation or over input,and ALC function,auto control of output power for stable coverage.
-Device auto detect isolation after start-up,to avoid self-oscillation.
-Able to increase signal coverage,decrease mobile phone radiation,and increase mobile phone battery lifespan.
-Digital filter technology makes out-of-band rejection more effective.
-Production function description
a) Manual gain control
When installing and operating the repeater ,engineer can adjust uplink and downlink gain in the range 1-31dB to ensure the repeater work in full output power condition.
b) Automatic gain level control
When the downlink received signal + downlink gain exceeds 40 dBm, the repeater will automatically activates the ALC function to reduce the downlink gain and keep the downlink output power of the repeater within 40 dBm.
When the uplink received the moble phone signal + uplink gain exceeds 40 dBm,the repeater automatically activates the ALC function to reduce the uplink gain and keep the uplink output power of repeater within 40 dBm
c) Automatic balance of uplink and downlink gain
When the downlink signal is strengthened during the operation of the repeater and the ALC starts to attenuate the downlink gain, the system simultaneously attenuates the uplink gain to maintain the signal balance between the downlink and uplink.
d) Isolation detection and elimination self-excitation
The repeater system detects the isolation between the BTS port and the MS port in real time. When the isolation is less than +15dB of the system gain, the system will automatically reduce the gain to prevent the system from self-excitation.
e) Automatic shutdown
When the repeater system exceeds the gain attenuation range of the system due to too strong received signal level or too low for isolation, the repeater system automatically shuts down the output to prevent the repeater from being burnt because of overload.
f) Uplink idle turn-off
When there is no end users in the coverage area, the system will automatically turns off the uplink output to minimize interference of the radio wave in the space.
f)Remote mornitoring and maintenance
The repeater has a built-in 4G wireless MODEM. Insert a SIM card to connect to the "Amplitec Helper" cloud platform to realize remote monitoring and set the operating parameters of the repeater.
-Amplitec S40T Mobile Cell Phone signal booster best selling on Amazon Alibaba can solve many signal problems easily.
-Amplitec S40T signal booster cover your home signal without blind area easily.Our mobile phone signal boosters all have one year warranty.
No: | Name | Model | Number | unit | Install No |
1 | 40dBm repeater | S40T Booster | 1 | PCS | RU1-RF |
2 | Donor antenna | OY0727-1165 | 1 | PCS | ANT1-RF |
3 | Service antenna | OP0727-1265 | 2 | PCS | ANT2-RF/ ANT3-RF |
4 | 2-Way Splitter | SP0727-2N | 1 | PCS | PS1-RF/2 |
5 | 1/2" cable | HCAAYZ-50-12 | 30 | M | |
6 | 1/2" cable bond | N-J-1/2-50A | 8 | PCS |
-Recommended accessories full sets including:
