Amplitec 5G 4x4 Mimo Directional Panel Indoor Antenna
Brand: Amplitec
Product origin: Made In China
-5g MIMO panel antenna wide frequency range 698~960/1710~2700/3300~3800 Mhz,support 2g 3g 4g 5g systems.
-Amplitec 5g MIMO antenna is Low PIM≤-150dBc.
-Amplitec new 5g signal receiver light weight design,but high gain.
-Amplitec MIMO panel antenna support max power 50Watt,suitable for indoor application,support wall mounting.
-Why everyone choose Amplitec panel MIMO 4x4 5g antenna?
-Amplitec 4X4 mimo 5g directional panel antenna, it usually used as the service antenna for the mimo cell phone mobile signal booster repeater amplifier,frequency range 698~3800mhz,support 2g 3g 4g 5g mobile network.
-Mimo antenna has four 4*4.3-10 Female port (the connection type could be customized), two in two out connection ports. The mobile cell phone 4g 5g network speed increase 200%.
-Not like other supplier normal 5g antenna,Amplitec 4x4 MIMO 5g antenna is high gain design,the best 2g 3g 4g 5g signal receiver,ensure the signal can be enhanced perfectly.
-Technical Specification
Electrical specifications | |||
Frequency range (MHz) | 698~960 | 1710~2700 | 3300~3800 |
Polarization | ±45° | ||
Gain (dBi) | 6 ± 1 | 8 ± 1 | 8 ± 1 |
Horizontal beam width (°) | 80 ± 15 | 60 ± 15 | 65 ± 15 |
Vertical beam width (°) | 75 | 55 | 40 |
Front-to-back ratio (dB) | ≥ 20 | ≥ 25 | ≥ 20 |
Cross-polar discrimination (dB) | / | ||
Isolation (dB) | ≥ 18 | ≥ 20 | ≥ 25 |
Impedance (Ω) | 50 | ||
VSWR | ≤ 1.8 | ||
Intermodulation IM3 (2×43dBm carrier) | ≤ -150 dBc | ||
Maximum power (W) | 50 | ||
Lighting protection | DC Ground | ||
Mechanical specifications | |||
Connector | 4*4.3-10 Female or 4* N-Female | ||
Connector position | Bottom | ||
Exposed cable size (cm) | 30(or customer requirement) | ||
Height/width/depth (mm) | 410*305*84 | ||
Packing size (mm) | 480*370*180 | ||
Weight (kg) | 2 | ||
Radome material | ABS | ||
Radome color | White(RAL9003) | ||
Operating temperature (℃) | -40~60 | ||
Application | Indoor | ||
Mounting | Wall Mounting |
-How to install Amplitec 5g MIMO 4x4 panel antenna?
1. Position and fix the mounting plate onto the wall with the countersunk self-tapping screws M4.2×25 and plastic accessories.
2. Finish the installation by matching the clamp piece on the antenna base plate to the mounting plate hanger.